Mechanical Products

Mechanical Products

Dyna Segmen is adding more products to its portfolio every year. Our product offer ranges from oil and gas industry to construction supplies. We deal with giant corporations to small businesses. Browse the tabbed navigation below for more information. Looking for a product that is not listed here? Call us and we might have a solution for you! Dyna Segmen offers products including but not limited to the following:

PTFE Lined-Tube System

Second Generation P.T.F.E

On request, steel pipes and shaped parts could also have an inner coating in TFM; its mechanical features are better than traditional P.T.F.E features.

TFM has a low porosity level than P.T.F.E, which allows poor gas fluid oozing trough TFM walls.

Molecular weight of TFM has been reduced to factor five than PTFE weight, so it is possible to get the following benefit

A better elastic return especially under high temperature
Low permeability
Fewer mechanics deformation underweight
A better compact polymer structure
Better weldability
High transparency
Better quality of layers
Smoother piece surfaces made by shaving cutting removal

At Dyna Segmen Sdn Bhd, we also provide hoses for mechanical usage such as:

Fuel and Oil Delivery Hose


Application: softwall hose used for the delivery and transfer of a wide range of petroleum porduct with aromatic content up to 30%. Avaiable at 10, 15-18 bar.

temperature range: -20C (-4F) to +70C (158F)

CONSTRUCTION:
Tube: black, smooth, NBR rubber compound

Reinforcement: high strength synthetic cord plus antistatic copper

Cover: black, smooth (wrapped finish) CR rubber compounded for an excellent resistance to weathering and oil

branding: continuous spiral red brand

Tank Truck Hose

Application: hardwall hose used for the suction and delivery of petroleum products with aromatic content up to 30%. Available at W.P. of 10 or 15 bar.
Temperature range: -20°C (-4°F) to +70°C (+158°F).

CONSTRUCTION

Reinforcement: high strength synthetic cord plus embedded steel helix wire and anti-static copper wire.

Cover: black, smooth (wrapped finish) CR rubber compound resistant to weathering and oil.

Branding: continuous spiral red brand

Stream Hose for 210C


Application: steel cord hose for saturated steam at 18 bar (261psi) working pressure, designed for service in many industries: chemical, petrochemical shipyard, etc. Not recommended for steam cleaner. The hose can reach peak value of 230°C, 18 bar, of superheated steam. For longer life drain after use.
Temperature range: -40°C (-40°F) to +210°C (+410°F).
CONSTRUCTION
Tube: black, smooth, EPDM rubber specially compounded to withstand saturated steam.

Reinforcement: plies of steel wire cord.

Cover: black, smooth, (wrapped finish) EPDM rubber with excellent resistance to high temperature, weathering and ageing; it is pin- pricked to prevent separation.

Standards: BS 5342 type 2,class A. ISO 6134 class I type 4.
NFT 47-263 cat. I type 3, on request available according to DIN 2825 specs.

Branding: continuous spiral embossed marking:
If BS 5342 the branding is: / BS 5342:85 / type 2 class A / I.D./ month and year ofmanufacture / W.P.
If ISO 6134 the branding is: ISO 6134:92 / / quarter and year of manufacture / type 4, class I /W.P.
If NFT 47-263 the brandig is: NFT 47-263 / / year of manufacture / type 3 cat. I / W.P.

The best solution for the loss of liquid or gaseous from broken off, perforated or leaked pipes.

Advantages of repair clamp:

Total resistance from corrosion; as there are no existing connections of different metals, the corrosion for electrolysis is limited.
Facility of assembly, taking apart and re-use of repair clamp FORD employed
Stainless steel bolts coated in P.T.F.E, to assure a limitless functionality

Why to choose our clamps?

100% stainless steel AISI 304 Standard.
Stainless steel is light in weight and, therefore, easy to install
In term of corrosion resistance, stainless steel is the best material available today
Fewer bolts and nut on all stainless steel repair clamp because the components are stronger than those produced in iron
Welding takes place by a robot to ensure consistent precision and optimum quality
No sharp edges
Diameter range is stamped on the plate to ensure visibility after many years in the ground

  • Designed to support horizontal pipe from floor stanchion. U-bolts and hex nuts are provided to hold pipe securely to saddle – Maximum temperature – 750º F
  • Conforms to Federal Specification WW-H-171E, Type 38, 4″ thru 36″, and Manufacturers Standardization Society SP-69, Type 37
  • Size Range – 4″ – 36″ pipe

Sphere and Bar Tees are utilized in a pig launcher/receiver system and/or at branches in the pipeline to ensure the safe passage of a pig or sphere past the open branch area.

To compliment our range of pigs and spheres, pipeline engineering has the in-house engineering, manufacturing and testing capacity to produce piggable Pipeline Sphere and Bar Tees.

Piggable Bar Tees incorporate simple bar sections welded across the pipeline tee branch to allow a pig to negotiate the branch opening. Piggable Sphere Tees are more complex and involve a slotted liner tube encased in an oversized jacket tee, such arrangement ensures the sphere remains in the pipeline and does not traverse into the branch pipe.

Piggable Tees are manufactured to specific customer project specifications and International Pressure Vessel and Piping Codes (ASME, PD5500 etc). Our capacity ranges from 2” NS to 54” NS, ANSI Ratings 150 to 2500 and API, using carbon, stainless and alloy steel materials.

Piggable Tee contracts are managed by our in-house Pressure Vessel Business Unit dedicated solely to the purpose of engineering, manufacturing and testing this type of equipment and Pig Launcher/Receiver Vessels. With over 15 years experience in this particular field, the Business Unit Engineers have particular expertise in supplying Tees for Sour Service environments, which require NACE and Corrosion Tested (HIC/SSCC) materials.

Ball Valve

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it.

Cryogenic Valve

Cryogenic transfer pumps are the pumps used on LNG piers to transfer liquefied natural gas from LNG carriers to LNG storage tanks, as they are cryogenic valves.

Throttle Stop Venting

As a new generation of multi-functional throttle stop vent valve developed on the basis of advanced technology of throttle valve. Such valve is characterized in reliable sealing, abrasion resistance, low noise, long service life and high universalization degree. It is widely used for flow regulation, stop and ventilation in petroleum, gas and chemical pipelines.

and more…

Dyna Segmen has expand its capability in design & supply pressure vessels. In 2014, We obtained authority to use ASME certification mark with the designator ‘U’. Certifications were also obtained from National Board of Boiler and Pressure Vessel inspectors of USA to apply the ‘NB’ and ‘R’ Stamps.

Dyna Segmen is now able to meet customer requirement for the following:

  • Pressure Vessel Design and Construction to ASME Boiler & Pressure Vessel Code, Section VIII, Division 1
  • Registration with National Board of USA of Pressure Vessel for permanent record
  • Repair of Pressure Vessel & Boiler to ASME Boiler and Pressure Vessel Codes
  • Certify Pressure Vessel to European Pressure Equipment Directive (PED) with ASME BPVC as the manufacturing code

Our Pressure Vessel crew consist of personnel with a combined experience of 40 years.

The type of Pressure Vessel and Process Equipment for the oil and gas, power generation and general process industries, in carbon and high-alloy steel are includes but is not limited to the following:

  • Pressure Vessels
  • Process Skids / Metering Skids
  • Heat Exchangers
  • Air Receiver Tanks
  • Autoclaves
  • Surge Vessels
  • An etc

We supply mechanical coupling & flange adapter to any pipe size and schedule to give the flexibility to our customer.

Size Range
DN80 -DN3200

Design Standard
BS EN 1092-1 / BS 512
BS EN 10224 / BS EN 10311
BS EN 10220
BS EN 1452-1 to BS EN 1452-5

PN Designation
PN2.5, PN6, PN10, PN16, PN25, PN40

Flange/Body Material
Mild Steel & Stainless Steel 304 & 316

Bolts/Stads/Nuts/Washers
Mild Steel & Stainless Steel 304 & 316

Gaskets
Natural Rubber/EPDM

Coatings
Bitumen Paint
Zinc Chromate
Fusion Bonded Epoxy Powder
Cold Applied Epoxy Jotamastic 138 Blue

Approvals/Certificates
IKRAM QA Certification
SPAN – National Water Services Commission
ISO 9001 Quality Management

# #

Website Security Test